Marantz PD5001 Guía de usuario Pagina 36

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 40
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 35
37
Remedy
• If there are no abnormalities in the image and sound,
the noise is caused by the cabinet reacting to
changes in temperature. This will not affect
performance.
• Leave some space between the display and the
connected components.
• Replace both batteries with new ones.
• Plug the monitor’s power cord into a power outlet.
• Press the power button on the monitor to turn on the
power.
• Replace both batteries with new ones.
• Point the remote control at the monitor’s remote
control sensor when pressing buttons, or remove the
obstacle.
• Eliminate the light by closing curtains, pointing the
light in a different direction, etc.
• Replace both batteries with new ones.
• Plug the monitor’s power cord into a power outlet.
• Increase the volume.
• Press the remote control’s MUTE button.
• Connect the speakers properly.
• Set AUDIO INPUT on the AUDIO menu correctly.
• Adjust picture control as needed.
Try another location for the monitor.
Be sure all connections are secure.
• Adjust picture controls as needed.
Check pin assignments and connections.
• Adjust the tint and color (under PICTURE).
• Turn on the computer’s power.
• Connect source to the monitor.
• Operate the computer (move the mouse, etc.).
• Adjust the IMAGE ADJUST properly.
• Press the WIDE button on the remote control and
adjust properly.
• Set to the proper resolution.
• Check the input signal.
• Promptly switch off the power of the main unit and
wait until the internal temperature drops. See*1.
• Prompty switch off the power of the main unit. See *2.
If the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requesting service.
Symptom
The unit emits a crackling sound.
Picture is disturbed.
Sound is noisy.
Remote control operates erroneously.
The remote control does not work.
Monitor’s power does not turn on when the
remote control’s power button is pressed.
Monitor does not operate when the remote
control’s buttons are pressed.
No sound or picture is produced.
Picture appears but no sound is produced.
Poor picture with VIDEO signal input.
Poor picture with RGB signal input.
Tint is poor or colors are weak.
Nothing appears on screen.
Part of picture is cut off or picture is not
centered.
Image is too large or too small.
Picture is unstable.
ON/STANDBY indicator is lighted in red.
ON/STANDBY indicator is blinking in red.
ON/STANDBY indicator is blinking in green
and red, or green.
Checks
• Are the image and sound normal?
• Is a connected component set directly in front or at
the side of the display?
• Are the remote control’s batteries worn out?
• Is the monitor’s power cord plugged into a power
outlet?
• Are all the monitor’s indicators off?
• Are the remote control’s batteries worn out?
• Is the remote control pointed at the monitor, or is
there an obstacle between the remote control and
the monitor?
• Is direct sunlight or strong artificial light shining on
the monitor’s remote control sensor?
•
Are the remote control’s batteries worn out?
• Is the monitor’s power cord plugged into a power
outlet?
• Is the volume set at the minimum?
• Is the mute mode set?
• Are the speakers properly connected?
• Is AUDIO INPUT set correctly?
• Improper control setting.
Local interference.
Cable interconnections.
Input impedance is not correct level.
• Improper control setting.
Incorrect 15 PIN connector pin connections.
• Are the tint and colors properly adjusted?
• Is the computer’s power turned on?
• Is a source connected?
• Is the power management function in the standby
or off mode?
• Is the position adjustment appropriate?
• Is the screen size adjustment appropriate?
• Is the computer’s resolution setting appropriate?
• Horizontal and / or vertical sync signal is not
present when the Intelligent Power Manager
control is on.
• The temperature inside the main unit has become
too high and has activated the protector.
——————
Troubleshooting
*1 Overheat protector
If the monitor becomes too hot, the overheat protector will be activated and the monitor will be turned off. If this happens, turn off the power to the monitor
and unplug the power cord. If the room where the monitor is installed is particularly hot, move the monitor to a cooler location and wait for the monitor
to cool for 60 minutes. If the problem persists, contact your dealer.
*2 In the following case, power off the monitor immediately and contact your dealer or authorized Service Center.
The monitor turns off 5 seconds after powering on and then the ON/STANDBY indicator blinks. It indicates that the power supply circuit, plasma display
panel, temperature sensor, or one or more fans have been damaged.
NOTE: Pixel defect
Plasma is one of the most advanced technologies for consumer products. The panel is made by high precision technology,
however some pixel defects may be found on the Plasma display panel. We are trying our best to control the quality in
order to reduce the number of defective pixels. It is almost impossible to have zero pixel defects, even using the most
advanced technology. This is not a problem only for Marantz, but all Plasma manufacturers. Therefore we have to note
that the warranty does not cover the Plasma display panel for pixel defects. We appreciate your understanding.
PD4201_35-37 06.9.7, 4:29 PMPage 37 Adobe PageMaker 6.5J/PPC
Vista de pagina 35
1 2 ... 31 32 33 34 35 36 37 38 39 40

Comentarios a estos manuales

Sin comentarios

Electrolux EHS6641P podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Płyty grzewcze Electrolux EHS6641P.
Dostarczamy 2 pdf podręczników Electrolux EHS6641P do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika






Więcej produktów i instrukcji dla Płyty grzewcze Electrolux

Modele Rodzaj dokumentu
EHF3920BOK Instrukcja Użytkownika     Electrolux EHF3920BOK User Manual, 40 strony
EHH3320NVK Instrukcja Użytkownika      Electrolux EHH3320NVK Handleiding, 76 strony
EHF3120FOK Instrukcja Użytkownika    Electrolux EHF3120FOK User Manual, 52 strony
EGG9363NOX Instrukcja Użytkownika   Electrolux EGG9363NOX User Manual [et] , 20 strony
KGS6404X Instrukcja Użytkownika   Electrolux KGS6404W User Manual, 20 strony
PX640UV Instrukcja Użytkownika   Electrolux PX640UV User Manual [nl] , 20 strony
EKM6130AOW Instrukcja Użytkownika   Electrolux EKM6130AOW User Manual [es] , 36 strony
EHD90230P Instrukcja Użytkownika     Electrolux EHD90230P User Manual, 60 strony
EKG613A1OX Instrukcja Użytkownika   Electrolux EKG613A1OX User Manual [sk] , 32 strony
GK58TSCN Instrukcja Użytkownika   Electrolux GK58TSCN Benutzerhandbuch [en] , 20 strony
EQW4111BOG Instrukcja Użytkownika      Electrolux EQW4111BOG Handleiding, 48 strony
EHX8H10FBK Instrukcja Użytkownika   Electrolux EHX8H10FBK User Manual [it] [ru] [sk] , 28 strony
EHH9552FOK Instrukcja Użytkownika     Electrolux EHH9552FOK Handleiding [da] [et] [sv] , 56 strony
EHF3920NOK Instrukcja Użytkownika      Electrolux EHF3920NOK Handleiding [sk] , 44 strony
PQ645UX Instrukcja Użytkownika     Electrolux PQ645UX User Manual [ro] , 56 strony
PVN645UOV Instrukcja Użytkownika   Electrolux PVN645UOV User Manual, 20 strony
EHD60150P Instrukcja Użytkownika   Electrolux EHD60150P User Manual, 40 strony
EV6120FK Instrukcja Użytkownika     Electrolux EV6120FK User Manual [et] [nl] , 48 strony
EGG6042NOW Instrukcja Użytkownika   Electrolux EGG6042NOW User Manual [bg] , 20 strony
EOR3420AOW Instrukcja Użytkownika Electrolux EOR3420AOW Brugermanual, 56 strony