Marantz SR7002 Guía de usuario descargar pdf (Pagina 2)

Using the RC8001SR remote: Press AMP; press >

(page right) button (under the D5 button) until

page 4 appears; press the ‘D2’ button.

SR7002 Multi-Zone Flowchart

• In this basic multi-zone system you will need:

1. An additional pair of speakers (such as bookshelf, in-wall or in-ceiling)

2. Good quality speaker cable of appropriate length

3. An ability to install and conceal the speaker cables to your desired location (if in doubt, we again suggest

using a professional Installer).

• The SR7002 features special speaker terminals (highlighted in a green box above) for either multi-

zone use or bi-amping use. This allows the SR7002 to be wired for 7.1 home theatre use AND multi-zone

use. The multi-zone feature can then be used when desired and the home theatre runs in 5.1 mode). When

the multi-zone is shut down, the home theater can operate in 7.1 mode again.

• Activating multi-zone speakers can be performed using either the ‘MULTI-SPEAKER’ button on the

front panel, or the remote control supplied with your receiver (model RC8001SR). Once activated, you

can use either the front panel or the RC8001SR remote to choose a source and set the volume for the speakers

in the multi-zone.

• There are additional multi-zone ‘control’ features and a multi-zone video feature, which are not

discussed here. Read your User Guide and contact your professional Custom Installer for advice on how to

use these features.

1. Are all sources connected

using analogue L/R audio cables?

YES

Connect all

sources with

analogue

audio cables.

(Multi-zone only

uses analogue

audio.)

2. Is the Surround B. (Back) speakers

setting set to ‘None’?

YES NO

Set Surround B.

(Back) speakers to

‘None’ in the Set-

up Menu under

2. Speaker Set-up/

Manual

3. Are you pressing the

‘MULTI-SPEAKER’ button?

YES

Press the ‘MULTI-

SPEAKER’ button.

(The ‘MULTI’

button turns on

the LINE LEVEL

output only.)

4. While ‘MULTI’ is flashing in the

SR7002 front display (shown left):

1. Choose a source to listen to

(using the remote or the

front panel input dial).

2. While ’MULTI’ is still

flashing, set

the multi-zone volume (with front

panel volume dial or the remote).

Enjoy!

To adjust the volume up or down:

1. Press ‘MULTI-SPEAKER’ button. The ’MULTI’ indicator goes out and multi-zone speakers are turned off.

2. Press ‘MULTI-SPEAKER’ again. Multi-zone speakers activate again and ‘MULTI’ flashes.

3. While ‘MULTI ’ is flashing, use the volume dial or the remote control to adjust the volume.

To SHUT DOWN the multi-zone speakers:

Press the ‘MULTI-ZONE’. the ’MULTI’ indicator goes out and multi-zone speakers are turned off.

First, install your multi-zone speakers and connect them to the multi-

zone speaker terminals. Now, follow these steps…

SR7002 rear panel

SR7002 front panel

SR7002 Set-up menu using On Screen Display;

Inset: Set-up Menu message in front window

Analogue input sockets, SR7002 rear panel

The ‘MULTI’ button on the remote control activates the line-level output, not the ‘multi-speaker’

speaker terminals. This line-level output is used for an external amplifier (such as the Marantz

SR4021) or to send sound to a second room TV.

The ‘MULTI’ indicator

flashes when the

SR7002 is in multi-

zone mode. While

flashing, multi-zone

adjustments can be

made.

The SR7002 includes a feature called ‘Multi-zone’. This means it can be used to

play music in another room in your home, or even outside. This 4-step

flowchart covers the basics in getting a pair of speakers working in another

room, using two of the seven the on-board amplifiers in your SR7002.

• The music playing in your other room can be completely different to the music playing in your home

theatre room. For example: a DVD can be playing in your lounge room, while a CD can be playing in the

kitchen — and at different volumes, too!

• The set-up described here is a basic method of achieving multi-zone sound. There are other, more

sophisticated ways to send music and video around your home using the SR7002—you can even

control the SR7002 from another room, using the supplied RC101 multi-zone remote. These types of

systems are more advanced, so we suggest you consult with a professional Custom Installer to help

you specify, install and configure a system exactly to your needs.

Speaker ‘C’ switch

must be OFF for

multi-zone use

1 2

Comentarios a estos manuales

Sin comentarios

Marantz SR7002 Guía de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Marantz SR7002