Marantz Reference Series PM-15S1 Manual de usuario descargar pdf (Pagina 23)

ENGLISH

HOW TO USE AND SET FEATURES

HOW TO SET ID

If using the PM-15S1 by itself as a stereo amplifier, set the ID

to “0”. When the PM-15S1 is shipped from the factory, the ID

is set to “0”.

When the ID is set to a number other than “0”, the PM-

15S1 cannot be used for standalone operation.

The ID number of the PM-15S1 appears on the display for

about 3 seconds after power is activated.

When multiple PM-15S1s are connected, a unique ID number

must be set for each one in order to distinguish between them.

The PM-15S1 that centrally controls the other PM-15S1s takes

ID 1. The PM-15S1 with ID 1 is called the “master”. The other

PM-15S1s that synchronize with the master are called “slaves”

and take IDs “2” - “4”. ID numbers must not be the same for

any two units.

Set ID numbers as follows.

1. While pressing and holding the DISPLAY button, press the

POWER ON/OFF button.

2. Turn the INPUT SELECTOR knob to the desired ID number.

When finished setting the ID number, turn power to the PM-

15S1 OFF. The setting is stored in memory and becomes active

the next time power to the PM-15S1 activated.

INPUT SELECTOR knob DISPLAY button

POWER ON/OFF button

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Sin comentarios

Marantz Reference Series PM-15S1 Manual de usuario Pagina 23